NCCTEC Scarifier Cutters using 42CrMo material, CNC lathe processing, ensure consistent size.The teeth head using isothermal quenching technology, made of tungsten carbide,cobalt metal and hard alloy.
5 pcs of 5 tips Scarifier Cutter | road marking milling tungsten carbide cutters .
NCCTEC Scarifier Cutters are using 42CrMo material,CNC lathe processing, ensure consistent size. After heat treatment, the hardness reached 42 degrees,the teeth head using isothermal quenching technology,made of tungsten carbide,cobalt metal and hard alloy.
Used for:
1. Removal of concrete, asphalt road, epoxy resin, the wear resistant ground up part or high pot of the ground of mild nap,
2. Removal of surface coating, paint, a variety of road marking; ground damage, contamination needs renovation,
3. Remove the old floor surface.
Main technical parameters:
Tip numbers: 5
Thickness of ncctec cutter body: 11mm
Diameter: 40mm /1.6''
Hole size: 15mm / 0.6''
Thickness of tip: 2 mm