NCCTEC Diamond Segments can be installed in diamond blades, grinding disc, PCD cup wheels, diamond core bits, etc.
108 pcs of Diamond Segments | Saw Blade segments | Concrete Stone Marble Cutting Teeths | 24*7.0*12 mm .
Size: different size
Uses:
Different size of diamond segments, used for cutting, grooving and slotting of various granite, marble, sandstone, ceramics, asphalt and other stone.
Characteristics:
1. NCCTEC diamond segments using diamond sheet material and metal carcass (Ti + Cr + Ni + Co) form a chemical bond can be reduced the segment loosing, raise the life.
2. change the single cutting to the combination of blade cut, optimize the sawing performance.
3. sharp tip, fast cutting speed and high cutting efficiency.
4. wear coefficient, long life and the overall cost-effective.
5. fast cutting, small slits, cut out the stone surface smooth, even in size.
Note:
Factory should add a certain amount of cooling water daily for tip cutting, the sprinkler flow should be large to have a better cooling effect!
the Combined Saw blade speed at 280 - 320 r / min, the trolley speed can’t be too fast!
The following are some normal sizes about the segments, we can also manufacture the segment upon customers' requests.
Blade Diameter (mm) |
Segment length (mm) |
Segment thickness (mm) |
Segment height (mm) |
Segment Quantities |
350 |
40 |
3.2 |
10/12/15 |
24 |
400 |
40 |
3.4 |
10/12/15 |
28 |
450 |
40 |
3.6 |
10/12/15 |
32 |
500 |
40 |
4 |
10/12/15 |
36 |
600 |
40 |
4.6 |
10/12/15 |
36/42 |
800 |
40 |
5.5 |
10/12/15 |
46 |
800 |
24 |
7.5/6.5 |
12 |
66 |
1000 |
26 |
7.6/7.0/6.4 |
12/20 |
70 |
1200 |
26 |
7.8/7.3/6.8 |
12/20 |
80 |
1600 |
26 |
9.4/8.9/8.4 |
12/20 |
108 |
1800 |
26 |
10/9.4/8.8 |
12/20 |
120 |
2000 |
24 |
11.1/10.5 |
12 |
128 |
2000 |
25 |
10.6/9.6 |
15 |
128 |
2000 |
26 |
10.6/10/9.4 |
20 |
128 |
2200 |
24 |
10 |
15 |
132 |
2500 |
24 |
12/11 |
15 |
140 |
2700 |
24 |
12/11 |
20 |
140 |
3000 |
26 |
13/12 |
20 |
160 |
300 |
26 |
13/12 |
15 |
160 |
3500 |
26 |
14/13 |
30 |
180 |
3500 |
26 |
14/13 |
20 |
180 |